Perimeter alarm system (if equipped), Arming the system, Disarming the system – FORD 2009 F-550 v.1 User Manual

Page 168: Triggering the anti-theft system, Locks and security

Advertising
background image

If not successful, the new coded key(s) will not start the vehicle’s engine
and the theft indicator will flash on and off and you may repeat Steps 1
through 5. If failure repeats, bring your vehicle to your authorized dealer
to have the new spare key(s) programmed.

PERIMETER ALARM SYSTEM (IF EQUIPPED)

The perimeter anti-theft system will warn you in the event of an
unauthorized entry to your vehicle.

If there is any potential perimeter anti-theft problem with your vehicle,
ensure ALL remote entry transmitters are taken to the authorized
dealer to aid in troubleshooting.

Arming the system

When armed, this system will respond if unauthorized entry is
attempted. When unauthorized entry occurs, the system will flash the
park/turn lamps and will sound the horn.

The system is ready to arm whenever the key is removed from the
ignition. Either of the following actions will prearm the alarm system:
• Press the

control on the remote entry transmitter.

• Open a door and press the power door lock control to lock all the

doors, and then close the door.

Disarming the system

You can disarm the system by any of the following actions:
• Unlock the doors by pressing the

control on your remote entry

transmitter.

• Unlock the doors with a key. Turn the key full travel (toward the front

of the vehicle) to ensure the alarm disarms.

• Turn the ignition to the on position with a programmed coded ignition

key.

Triggering the anti-theft system

The armed system will be triggered if any door or hood is opened
without using the key or the remote entry transmitter.

2009 F-250/350/450/550 (f23)
Owners Guide, 1st Printing
USA
(fus)

Locks and Security

168

Advertising
This manual is related to the following products: