Average fuel economy (afe), Instantaneous fuel economy, Elapsed timer – FORD 2009 Flex v.2 User Manual

Page 118: Driver controls

Advertising
background image

Average fuel economy (AFE)

Select this function from the INFO
menu to display your average fuel
economy in miles/gallon or
liters/100 km.
If you calculate your average fuel
economy by dividing miles traveled by gallons of fuel used (liters of fuel
by used 100 kilometers traveled), your figure may be different than
displayed for the following reasons:
• your vehicle was not perfectly level during fill-up

• differences in the automatic shut-off points on the fuel pumps at

service stations

• variations in top-off procedure from one fill-up to another

• rounding off the displayed values to the nearest 0.1 gallon (liter)
1. Drive the vehicle at least 5 miles (8 km) with the speed control
system engaged to display a stabilized average.

2. Record the highway fuel economy for future reference.

It is important to press the RESET control after setting the speed
control to get accurate highway fuel economy readings.

Instantaneous fuel economy

Select this function from the INFO
menu to display your instantaneous
fuel economy. This will display your
fuel economy as a bar graph ranging
from

poor economy to

excellent economy.

Your vehicle must be moving to calculate instantaneous fuel economy.
When your vehicle is not moving, this function shows

, one or no bars

illuminated. Instantaneous fuel economy cannot be reset.

Elapsed timer

Select this function from the INFO
menu to display a timer.

To operate the elapsed timer
perform the following:

1. Press and release RESET to start
or stop the timer.

2. Press and hold RESET for two seconds to reset the timer.

2009 Flex (471)
Owners Guide, 2nd Printing
USA
(fus)

Driver Controls

118

Advertising