Car finder, Sounding a panic alarm, Activating the memory feature – FORD 2009 Flex v.2 User Manual

Page 142: Locks and security

Advertising
background image

WARNING: Make sure the liftgate is closed to prevent exhaust
fumes from being drawn into the vehicle. This will also prevent

passengers and cargo from falling out. If you must drive with the
liftgate open, keep the vents open so outside air comes into the
vehicle.

Car finder

Press

twice within three seconds. The horn will chirp and the turn

lamps will flash. It is recommended that this method be used to locate
your vehicle, rather than using the panic alarm.

Sounding a panic alarm

Press

to activate the alarm. The horn will sound and the turn lamps

will flash for a maximum of three minutes. Press again or turn the
ignition to the on position to deactivate, or wait for the alarm to time out
in three minutes.

Note: The panic alarm will only operate when the ignition is in the off
position.

Memory seats/power mirrors/adjustable pedals (if equipped)

The Integrated Keyhead Transmitter allows you to recall the memory
seat/power mirrors/adjustable pedals feature.

Press

to automatically move the seat, mirrors and adjustable pedals

(if equipped) to the desired memory position. Note: The seat will not
travel to its final position if the key is not in the ignition and the easy
entry feature is enabled.

Activating the memory feature

To activate this feature:

1. Position the seat, mirrors, and adjustable pedals (if equipped) to the
desired positions.

2. Press and hold either the 1 or 2
control on the driver’s door for five
seconds. (A tone will be heard after
1

1

2

seconds when the memory store

is done) continue to hold until a
second tone is heard after five
seconds.

2009 Flex (471)
Owners Guide, 2nd Printing
USA
(fus)

Locks and Security

142

Advertising