Activating the memory feature, Deactivating the memory feature, Replacing the battery – FORD 2009 Taurus v.2 User Manual

Page 105: Locks and security

Advertising
background image

Activating the memory feature

To activate this feature:

1. Position the seat, mirrors and adjustable pedals to the desired
positions.

2. Press and hold either the 1 or 2
control on the driver’s door for five
seconds. (A tone will be heard after
1

1

2

seconds when the memory store

is done) continue to hold until a
second tone is heard after five
seconds.

3. Within three seconds press the

on the transmitter.

4. A tone will be heard when the activation is complete.

5. Repeat this procedure for another transmitter if desired.

Deactivating the memory feature

To deactivate this feature:

1. Press and hold either the 1 or 2 control on the driver’s door for five
seconds. (A tone will be heard after 1

1

2

seconds when the memory store

is done) continue to hold until a second tone is heard after five seconds.

2. Within three seconds press the

on the transmitter.

3. A tone will be heard when the deactivation is complete.

4. Repeat this procedure for another transmitter if desired.

Replacing the battery

The Integrated Keyhead Transmitter uses one coin type three-volt
lithium battery CR2032 or equivalent.

To replace the battery:

1. Twist a thin coin in the slot of the
IKT near the key ring in order to
remove the battery cover.

2009 Taurus (500)
Owners Guide, 2nd Printing
USA
(fus)

Locks and Security

105

Advertising