FORD 2009 Taurus v.2 - Manual (Page 62)

Replacing front parking lamp/turn signal/sidemarker bulbs
1. Make sure headlamp switch is in the off position, then open the hood.
2. Reach in behind the headlamp assembly to access the bulb sockets
and connectors.
3. Locate the parking/turn signal
lamp electrical connector and
remove it by pulling it straight off.
4. Remove the bulb socket by
turning it counterclockwise and
pulling it straight out.
5. To remove the bulb, pull it
straight out of the bulb socket.
Install the new bulb(s) in reverse order.
Replacing rear brake/tail/turn/backup and side marker lamp bulbs
The brake/tail/turn/backup and side marker lamp bulbs are located in the
tail lamp assembly. Follow the same steps to replace either bulb.
• (1) Backup lamp
• (2) Brake/tail/turn lamp
• (3) Side marker lamp
1. Make sure the headlamp switch is in the off position and open the
trunk.
2009 Taurus (500)
Owners Guide, 2nd Printing
USA (fus)
Lights
62