High beams, Flash to pass, Daytime running lamps (drl) (if equipped) – FORD 2008 Escape v.1 User Manual

Page 43: Lights

Advertising
background image

High beams

Push the lever toward the
instrument panel to activate. Pull
the lever towards you to deactivate.

Flash to pass

Pull toward you slightly to activate
and release to deactivate.

Daytime running lamps (DRL) (if equipped)

Turns the lowbeam headlamps on with a reduced output.

To activate:
• the ignition must be in the 3 (RUN) position.
• the headlamp control must be in the OFF, parking lamps or autolamp

position.

• with automatic transmission, the transmission is not in P (Park),
• with manual transmission, the parking brake must be released.

Always remember to turn on your headlamps at dusk or during
inclement weather. The Daytime Running Lamp (DRL) system

does not activate the tail lamps and generally may not provide
adequate lighting during these conditions. Failure to activate your
headlamps under these conditions may result in a collision.

2008 Escape (204)
Owners Guide (post-2002-fmt)
USA
(fus)

Lights

43

Advertising