Removing the spare tire and jack, Tire change procedure, Roadside emergencies – FORD 2008 Taurus v.1 User Manual

Page 250

Advertising
background image

Removing the spare tire and jack

1. Lift the trunk cargo cover, and
remove the wing nut that secures
the spare tire by turning it
counterclockwise.

2. Lift and remove the spare tire
from the trunk.

3. Remove the second wing nut that
secures the jack retention bracket
by turning it counterclockwise,
remove the jack kit from the
vehicle.

4. Remove the jack and the wrench
from the felt bag. Fold down the
wrench socket to use to loosen the
lug nuts and to operate the jack.

Tire change procedure

When one of the front wheels is off the ground, the transaxle
alone will not prevent the vehicle from moving or slipping off the

jack, even if the vehicle is in P (Park).

To help prevent the vehicle from moving when you change a tire,
be sure to place the transaxle in P (Park), set the parking brake

and block (in both directions) the wheel that is diagonally opposite
(other side and end of the vehicle) to the tire being changed.

If the vehicle slips off the jack, you or someone else could be
seriously injured.

Do not attempt to change a tire on the side of the vehicle close
to moving traffic. Pull far enough off the road to avoid the

danger of being hit when operating the jack or changing the wheel.

2008 Taurus (tau)
Owners Guide (post-2002-fmt)
USA
(fus)

Roadside Emergencies

250

Advertising