FORD 2008 Taurus v.1 - Manual (Page 253)

4. Insert the straight end of the jack
retention bracket through the eyelet
of the angled bracket and swing the
retention bracket over the jack. With
the jack in place, place the end of
the retention bracket over the
threaded stud in the trunk floor and
secure it with the plastic wing nut.
If you are stowing the flat tire:
1. Install the jack retention bracket as shown in Step 4 under Stowing
the tire and jack, without securing the jack beneath it.
2. Place the tire, with the wheel facing downward, into the spare tire
well and secure the wheel with the large wing nut.
If you are stowing the temporary
spare tire, place the tire over the
jack and secure it with the large
wing nut.
2008 Taurus (tau)
Owners Guide (post-2002-fmt)
USA (fus)
Roadside Emergencies
253