One time disable, Deactivating/activating the beltminder feature, Seating and safety restraints – FORD 2007 E-450 v.1 User Manual

Page 74

Advertising
background image

Reasons given...

Consider...

“The people I’m with don’t
wear belts”

Set the example, teen deaths occur
4 times more often in vehicles with
TWO or MORE people. Children and
younger brothers/sisters imitate
behavior they see.

“I have an airbag”

Airbags offer greater protection when
used with safety belts. Frontal airbags
are not designed to inflate in rear and
side crashes or rollovers.

“I’d rather be thrown clear”

People who are ejected are
40 times more likely to DIE.
Safety belts help prevent ejection,
WE CAN’T “PICK OUR CRASH”.

Do not sit on top of a buckled safety belt or insert a latchplate
into the buckle to avoid the BeltMinder

௡ chime. To do so may

adversely affect the performance of the vehicle’s air bag system

One time disable

Any time the safety belt is buckled and then unbuckled during an
ignition ON cycle, the BeltMinder

௡ will be disabled for that ignition cycle

only.

Deactivating/activating the BeltMinder

feature

Read Steps 1 - 5 thoroughly before proceeding with the
deactivation/activation programming procedure.

The BeltMinder

௡ feature can be deactivated/activated by performing the

following procedure:

Before following the procedure, make sure that:
• the parking brake is set
• the gearshift is in P (Park) (automatic transmission)
• the ignition switch is in the OFF position
• all vehicle doors are closed
• the driver’s safety belt is unbuckled
• the parklamps/headlamps are in the OFF position

2007 Econoline (eco)
Owners Guide (post-2002-fmt)
USA
(fus)

Seating and Safety Restraints

74

Advertising
This manual is related to the following products: