FORD 2007 Escape v.1 - Manual (Page 70)

1. Select this function from the
INFO menu then press the SET
control to access the system check
function.
2. Press and release the SET control
to display “OIL CHNG XXX% HOLD
SET NEW”.
3. Press and hold the SET control
for 2 seconds to display “OIL
CHANGE SET TO 100%”.
INFO UNAVAIL. These messages indicate improper operation of the
vehicle network communication systems for the following vehicle
modules.
• Fuel computer
• Charging system
• Door sensor
• Brakes
• Exterior lamps
• Emissions system
• 4WD info
Contact your Ford Dealer as soon as possible if these messages occur on
a regular basis.
2007 Escape (204)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
70