Bulb replacement, Headlamp condensation, Using the right bulbs – FORD 2007 Escape Hybrid User Manual

Page 82: Replacing the interior bulbs, Replacing exterior bulbs, Replacing headlamp bulbs, Lights

Advertising
background image

BULB REPLACEMENT

Headlamp Condensation

The headlamps are vented to equalize pressure. When moist air enters
the headlamp(s) through the vents, there is a possibility that
condensation can occur. This condensation is normal and will clear
within 45 minutes of headlamp operation.

Using the right bulbs

Replacement bulbs are specified in the chart below. Headlamp bulbs must
be marked with an authorized “D.O.T.” for North America and an “E” for
Europe to ensure lamp performance, light brightness and pattern and safe
visibility. The correct bulbs will not damage the lamp assembly or void the
lamp assembly warranty and will provide quality bulb burn time.

Function

Number of bulbs

Trade number

Park/turn lamps (front)

2

3157 AK (amber)

Headlamps (low beams)

2

H11

Headlamps (high beams)

2

H7

Rear stop/tail/sidemarker

2

3157K or 4157K

Rear turn lamps

2

3156

Backup lamp

2

3156

Foglamp (front)

2

PS24WFF

Center High-mount stop lamp

5

W5W

Rear license plate lamp

2

W5W

All replacement bulbs are clear in color except where noted.

To replace all instrument panel lights - see your authorized dealer

Replacing the interior bulbs

Check the operation of all bulbs frequently.

Replacing exterior bulbs

Check the operation of all the bulbs frequently.

Replacing headlamp bulbs

1. Make sure that the headlamp control is in the OFF position and open
the hood.

2007 Escape Hybrid (ehv)
Owners Guide (post-2002-fmt)
USA
(fus)

Lights

82

Advertising