FORD 2007 Escape Hybrid - Manual (Page 94)

Increasing speed while using speed control
There are two ways to set a higher
speed:
• Press and hold the SET ACC
control until you get to the
desired speed, then release the
control. You can also use the SET
ACC control to operate the
Tap-Up function. Press and
release this control to increase the vehicle set speed in small amounts
by 1 mph (2 km/h).
• Use the accelerator pedal to get to the desired speed. When the
vehicle reaches that speed press and release the SET ACC control.
Reducing speed while using speed control
There are two ways to reduce a set
speed:
• Press and hold the CST control
until you get to the desired
speed, then release the control.
You can also use the CST control
to operate the Tap-Down
function. Press and release this
control to decrease the vehicle set speed in small amounts by 1 mph
(2 km/h).
• Depress the brake pedal until the
desired vehicle speed is reached,
then press the SET ACC control.
Disengaging speed control
There are two ways to disengage the speed control:
• Depress the brake pedal. This will not erase your vehicle’s previously
set speed.
RSM SET
ACC
CST
RSM SET
ACC
CST
RSM SET
ACC
CST
2007 Escape Hybrid (ehv)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
94