Panel dimmer control, Aiming the headlamps, Turn signal control – FORD 2006 Crown Victoria v.2 User Manual

Page 42: Lights

Advertising
background image

PANEL DIMMER CONTROL

Use to adjust the brightness of the
instrument panel during headlamp
and parklamp operation.
• Rotate the thumbwheel from left

to right to brighten the
instrument panel.

• Rotate the thumbwheel from right

to left to dim the instrument
panel.

Domelamp Control

The panel dimmer control also controls the domelamp operation.
• Rotate the thumbwheel fully to the right, past detent to activate the

domelamp.

• In order to turn off the domelamp, rotate the thumbwheel to the left.

AIMING THE HEADLAMPS

The headlamps on your vehicle are properly aimed at the assembly plant.
If your vehicle has been in an accident the alignment of your headlamps
should be checked by your authorized dealer.

TURN SIGNAL CONTROL
• Push down to activate the left

turn signal.

• Push up to activate the right turn

signal.

The flash rate of the turn signal will speed up considerably if the left or
right turn lamp bulb (front or rear) is burned out.

2006 Crown Victoria (cro)
Owners Guide (post-2002-fmt)
USA
(fus)

Lights

42

Advertising