FORD 2006 Mustang v.2 - Manual (Page 230)

Item
Ford part
name
Ford part
number
Ford
specification
Disc brake
caliper rails
Motorcraft
Silicone Brake
Caliper Grease
and Dielectric
Compound
XG-3-A ESE-M1C171-A
Windshield
washer fluid
Motorcraft
Premium
Windshield
Washer
Concentrate
ZC-32-A WSB-M8B16-A2
1 Add 4 oz. (118 ml) of Additive Friction Modifier XL-3 or equivalent
meeting Ford specification EST-M2C118-A for complete refill of
Traction-Lok axles.
Ford design rear axles contain a synthetic lubricant that does not require
changing unless the axle has been submerged in water.
2 Ensure the correct automatic transmission fluid is used. MERCON
௡ and
MERCON
௡ V are not interchangeable. DO NOT mix MERCON௡ and
MERCON
௡ V. Refer to scheduled maintenance information to
determine the correct service interval.
ENGINE DATA
Engine 4.0L V6 engine 4.6L V8 engine
Cubic inches 245 281
Required fuel 87 octane 87 octane
Firing order 1-4-2-5-3-6 1-3-7-2-6-5-4-8
Ignition system EDIS Coil on plug
Spark plug gap 0.052–0.056 inch
(1.32–1.42 mm) 0.040–0.050 inch
(1.02–1.27 mm)
1
Compression ratio 9.7:1 9.8:1
1 The spark plug gap is not adjustable on the 4.6L V8.
2006 05+ Mustang (197)
Owners Guide (post-2002-fmt)
USA (fus)
Maintenance and Specifications
230