FORD 2006 Mustang v.2 - Manual (Page 54)

of the monitored systems, the message center will indicate either an OK
message or a warning message for two seconds.
Pressing the RESET control cycles the message center through each of
the systems being monitored.
The sequence of the system check report and how it appears in the
message center is as follows:
1. OIL PRESSURE
2. CHARGING SYSTEM
3. DRIVER DOOR
4. PASSENGER DOOR
5. TRUNK
6. BRAKE SYSTEM
7. TRAC CONTROL (if equipped)
8. FUEL CAP
9. FUEL LEVEL
10. MILES TO EMPTY
Display color
The instrument cluster gauges are backlit with white backlighting when
the headlamps are off. When the headlamps are on, the user can select
one of six preset colors or one user definable color (MyColor
௢) for the
nighttime gauge backlighting. Headlamps must be on to set up the
nighttime display color.
Note: A gauge in a warning condition will be lit red when the headlamps
are on.
1. Press SETUP to get to the
DISPLAY COLOR set up menu.
2. Pressing RESET will scroll
through the following selectable
colors:
Green Blue
Purple White
Orange Red
MyColor Adjust (to define MyColor)
Adjusting MyColor
௢: MyColor௢ is a user defined backlighting color.
The backlighting colors are achieved through the blending of light from
2006 05+ Mustang (197)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
54