Locks and security – FORD 2005 Crown Victoria v.1 User Manual

Page 88

Advertising
background image

• When the ignition is in the 3 (ON) position, the indicator will glow for

3 seconds to indicate normal system functionality.

If a problem occurs with the SecuriLock

௢ system, the indicator will flash

rapidly or glow steadily when the ignition is in the 3 (ON) position. If
this occurs, the vehicle should be taken to an authorized dealer for
service.

Automatic arming

The vehicle is armed immediately
after switching the ignition to the 1
(OFF/LOCK) position.

The theft indicator on the
instrument panel will flash every
two seconds when the vehicle is
armed.

Automatic disarming

Switching the ignition to the 3 (ON) position with a coded key disarms
the vehicle.
• The theft indicator on the instrument panel will illuminate for three

seconds and then go out.

• If the theft indicator stays on for an extended period of time or

flashes rapidly, have the system serviced by your dealer.

Replacement keys

If your keys are lost or stolen and you don’t have an extra coded key,
you will need to have your vehicle towed to a dealership. The key codes
need to be erased from your vehicle and new coded keys will need to be
programmed.

Replacing coded keys can be very costly. Store an extra programmed key
away from the vehicle in a safe place to help prevent any
inconveniences. Please visit an authorized dealer to purchase additional
spare or replacement keys.

Programming spare keys

A maximum of eight keys can be coded to your vehicle. Only
SecuriLock

௢ keys can be used. To program a coded key yourself, you

4

3

2

1

REVIEW COPY
2005 Crown Victoria (cro), Owners Guide (post-2002-fmt) (own2002),
Market: USA_English (fus)

Locks and Security

88

Advertising