Unlocking the doors, Locking the doors/liftgate, Locks and security – FORD 2005 Explorer v.3 User Manual

Page 100

Advertising
background image

The remote entry system allows you
to lock or unlock all vehicle doors
and liftgate and open the liftgate
window without a key.

The remote entry lock/unlock feature operates in any ignition position.
The liftgate glass feature operates as long as the vehicle’s speed is less
than 3 mph (5 km/h). The panic feature operates with the key in the 1
(OFF/LOCK) or 2 (ACC) position.

If there is any potential remote keyless entry problem with your vehicle,
ensure ALL remote entry transmitters are brought to the dealership, to
aid in troubleshooting.

Unlocking the doors

1. Press

and release to unlock the driver’s door. Note: The interior

lamps will illuminate.

2. Press

and release again within three seconds to unlock all the

doors.

The remote entry system activates the illuminated entry feature. This
feature turns on the interior lamps for 25 seconds or until the ignition is
turned to the 3 (ON) position. If the dome lamp control is in the off
position the illuminated entry feature will not work.

The inside lights will not turn off if:
• they have been turned on using the dimmer control or
• any door is open.
The battery saver feature will turn off the interior lamps 30 minutes after
the ignition is turned to the 1 (OFF/LOCK) position.

Locking the doors/liftgate

1. Press

and release to lock all the doors and liftgate. The lamps will

flash. Note: If any door, the liftgate or the liftgate glass are not closed
properly, the lamps will not flash.

2005 Explorer (exp)
Owners Guide (post-2002-fmt)
USA
(fus)

Locks and Security

100

Advertising