Autolock, Deactivating/activating autolock, Locks and security – FORD 2005 Explorer v.3 User Manual

Page 106

Advertising
background image

To unlock all doors and liftgate, press the 3

• 4 control within five

seconds.

To open the liftgate window, press the 5

• 6 control within five

seconds.

To lock all doors, liftgate and liftgate window, press the 7

• 8 and

the 9

• 0 at the same time. Note: The driver’s door must be closed. You

do not need to enter the keypad code first.

Autolock

The autolock feature will lock all the doors, liftgate and liftgate window
when:
• all the doors, the liftgate and liftgate window are closed,
• the ignition is in the 3 (ON) position,
• you shift into any gear putting the vehicle in motion, and
• the brake pedal is released and the vehicle attains a speed greater

than 5 mph (8 km/h).

The autolock feature repeats when:
• any door, liftgate or liftgate window is opened then closed while the

ignition is in the 3 (ON) position, and

• you put the vehicle in motion by releasing the brake pedal and the

vehicle attains a speed greater than 5 mph (8 km/h).

Deactivating/activating autolock

Your vehicle comes with the autolock feature activated. There are four
methods to enable/disable this feature: One is through your dealer, the
second with a power door unlock/lock sequence, the third with the
keypad, and the fourth by using the message center (if equipped).

Before following the activation or deactivation procedures, make sure
that the anti-theft system is not armed, ignition is off, and all vehicle
doors, liftgate and liftgate window are closed.

2005 Explorer (exp)
Owners Guide (post-2002-fmt)
USA
(fus)

Locks and Security

106

Advertising