Tires, wheels and loading – FORD 2005 F-550 v.2 User Manual

Page 141

Advertising
background image

3. Fully insert the jack handle
through the bumper hole and into
the guide tube. The key and lock
will engage with a slight push and
counterclockwise turn. Some
resistance will be felt when turning
the jack handle assembly.

4. Turn the handle counterclockwise
and lower the spare tire until you
can slide the tire rearward and the
cable is slack.
5. Remove the retainer through the center of the wheel.
Tire change procedure

1. Park on a level surface, activate
hazard flashers and set the parking
brake.
• Automatic transmission: Place

gearshift lever in P (Park).

• Manual transmission: Place

gearshift lever in R (Reverse).

• Electronic Shift-On-the-Fly

(ESOF) 4WD: Place transfer case
in any position.

• Manual shift transfer case 4WD:

Place transfer case in 2H, 4H or
4L.

To help prevent the vehicle
from moving when you

change a tire, be sure the parking
brake is set, then block (in both
directions) the wheel that is
diagonally opposite (other side
and end of the vehicle) to the tire
being changed.

2. Turn engine off and block the diagonally opposite wheel (block not
provided).

2005 F250/350/450/550 (f23)
Owners Guide (post-2002-fmt)
USA_English
(fus)

Tires, Wheels and Loading

141

Advertising
This manual is related to the following products: