Tires, wheels and loading – FORD 2005 F-550 v.2 User Manual

Page 142

Advertising
background image

3. Remove the jack, jack handle, lug wrench and spare tire from the
stowage locations.

4. Use the tip of the lug wrench to remove any wheel trim.

5. Loosen each wheel lug nut one-half turn counterclockwise but do not
remove them until the wheel is raised off the ground.

When one of the rear wheels is off the ground, the transmission
alone will not prevent the vehicle from moving or slipping off the

jack, even if the transmission is in P (Park) (automatic transmission)
or R (Reverse) (manual transmission). To prevent the vehicle from
moving when you change the tire, be sure that the parking brake is set
and the diagonally opposite wheel is blocked.

If the vehicle slips off the jack, you or someone else could be
seriously injured.

The following steps apply to F–250/F–350 Single Rear Wheel
(SRW) vehicles only (unless otherwise noted):

6. Insert the hooked end of the jack
handle into the jack and use the
handle to slide the jack under the
vehicle.

7. Position the jack according to the
following guides:

• Front (4x2)

2005 F250/350/450/550 (f23)
Owners Guide (post-2002-fmt)
USA_English
(fus)

Tires, Wheels and Loading

142

Advertising
This manual is related to the following products: