Maintenance and specifications – FORD 2004 Crown Victoria v.1 User Manual
Page 231
Item
Ford part
name
Ford part
number
Ford
specification
Rear Axle
Lubricant
2
Motorcraft SAE
80W-90
Premium Rear
Axle Lubricant
XY-80W90-QL
WSP-M2C197-A
Windshield
washer fluid
Motorcraft
Premuim
Windshield
Washer
Concentrate
ZC-32-A
WSB-M8B16–A2
1
Use only brake fluids certified to meet Ford specifications. DOT 3 fluid
is recommended. However, if DOT 3 is not available, DOT 4 fluid can be
used.
2
Add 118 ml (4 oz.) of Additive Friction Modifier XL-3 or equivalent
meeting Ford specification EST-M2C118-A for complete refill of
Traction-Lok rear axles.
3
Ensure the correct automatic transmission fluid is used. Transmission
fluid requirements are indicated on the dipstick or on the dipstick
handle. MERCON
and MERCON V are not interchangeable. DO NOT
mix MERCON
and MERCON V. Refer to your scheduled maintenance
guide to determine the correct service interval.
ENGINE DATA
Engine
4.6L V8 engine
Cubic inches
281
Required fuel
87 octane
Firing order
1-3-7-2-6-5-4-8
Spark plug gap
1.3-1.4 mm (0.052-0.056 inch)
Ignition system
Coil on plug
Compression ratio
9.4:1
2004 Crown Victoria (cro)
Owners Guide (post-2002-fmt)
USA English (fus)
Maintenance and Specifications
231