Seating and safety restraints – FORD 2004 Explorer v.1 User Manual

Page 123

Advertising
background image

Several Safety Canopy

system components get hot

after inflation. Do not touch them
after inflation.

If the Safety Canopy

௢ system has deployed, the Safety

Canopy

will not function again. The Safety Canopy

system (including the A, B and C pillar trim) must be inspected
and serviced by a qualified technician in accordance with the
vehicle service manual.
If the Safety Canopy

௢ is not replaced, the

unrepaired area will increase the risk of injury in a collision.

Determining if the system is operational
The SRS uses a readiness light in the instrument cluster or a tone to
indicate the condition of the system. Refer to the Air bag readiness
section in the Instrument Cluster chapter. Routine maintenance of the
air bag is not required.
Any difficulty with the system is indicated by one or more of the
following:
• The readiness light (same light as for front air bag system) will either

flash or stay lit.

• The readiness light will not illuminate immediately after ignition is

turned on.

• A series of five beeps will be heard. The tone pattern will repeat

periodically until the problem and light are repaired.

If any of these things happen, even intermittently, have the SRS serviced
at your dealership or by a qualified technician immediately. Unless
serviced, the system may not function properly in the event of a collision
or rollover event.

Disposal of air bags and air bag equipped vehicles
(including pretensioners)
See your local dealership or qualified technician. Air bags MUST BE
disposed of by qualified personnel.

2004 Explorer (exp)
Owners Guide (post-2002-fmt)
USA English
(fus)

Seating and Safety Restraints

123

Advertising