Driving – FORD 2004 Mustang v.1 User Manual

Page 109

Advertising
background image

2. Insert the key and turn it to OFF. Apply the
brake pedal and shift to N (Neutral)
.

When the key is in the ignition and in the
OFF position, the automatic transmission

shift lever can be moved from the P (Park)
position without the brake pedal depressed. To
avoid unwanted vehicle movement, always set the
parking brake.

3. Start the vehicle.

If it is necessary to use the above procedure to
move the gearshift lever, it is possible that a fuse
has blown or the vehicle’s brakelamps are not
operating properly. Refer to Fuses and relays in the
Roadside emergencies chapter.

Do not drive your vehicle until you verify
that the brakelamps are working.

Always set the parking brake fully and make
sure the gearshift is latched in P (Park).

Turn the ignition to the LOCK position and remove
the key whenever you leave your vehicle.

If the parking brake is fully released, but the
brake warning lamp remains illuminated, the

brakes may not be working properly. See your
dealer or a qualified service technician.

Driving with an automatic overdrive
transmission with console gearshift and O/D off
switch

Your transmission is equipped with an adaptive
learning strategy found in the vehicle computer. This
feature is designed to increase durability and
provide consistent shift feel over the life of the
vehicle. A new vehicle or transmission may have firm
and/or soft shifts. This operation is considered

2004 Mustang (mus)
Owners Guide (post-2002-fmt)
USA English
(fus)

Driving

109

Advertising