FORD 2004 Mustang v.1 - Manual (Page 218)

4 Indicates only approximate dry-fill capacity. Some
applications may vary based on cooler size and if
equipped with an in-tank cooler. The amount of
transmission fluid and fluid level should be set by
the indication on the dipstick’s normal operating
range.
5 Service refill capacity is determined by filling the
transmission to the bottom of the filler hole with the
vehicle on a level surface.
6 Use of synthetic or synthetic blend motor oil is not
mandatory. Engine oil need only meet the
requirements of Ford specification WSS-M2C153–H
and the API Certification mark.
LUBRICANT SPECIFICATIONS
Item Ford part
name Ford part
number Ford
specification
Brake fluid Motorcraft
High
Performance
DOT 3 Motor
Vehicle Brake
Fluid PM-1 ESA-M6C25-A
and DOT 3
Door
weatherstrips Silicone
Lubricant XL-6 ESR-M13P4-A
Door latch,
hood latch,
auxiliary
hood latch,
door hinges,
striker plates,
seat tracks
and fuel filler
door hinge Multi-Purpose
Grease XG-4 or XL-5 ESR-M1C159-A
or
ESB-M1C93-B
Engine
coolant Motorcraft
Premium
Gold Engine
Coolant
(yellow-
colored) VC-7–A WSS-M97B51
–A1
2004 Mustang (mus)
Owners Guide (post-2002-fmt)
USA English (fus)
Maintenance and Specifications
218