Driver controls – FORD 2003 Crown Victoria v.3 User Manual

Page 64

Advertising
background image

To replace the wiper blades:

1. Pull the wiper arm away from the
windshield and lock into the service
position.

2. Press and hold the tab on the
blade and slide the blade off the
wiper arm pin.

3. To attach the new wiper blade,
press and hold the tab on the blade
and slide the blade on to the wiper
arm pin. Then release the tab.

TILT STEERING

Pull the tilt steering control toward
you to move the steering wheel up
or down. Hold the control while
adjusting the wheel to the desired
position, then release the control.

Never adjust the steering wheel when the vehicle is moving.

OVERHEAD CONSOLE WITHOUT MOON ROOF (IF EQUIPPED)

The appearance of your vehicle’s overhead console will vary according to
your option package. Some of the features in the overhead console
include a storage bin and compass. To program the Homelink

௡, refer to

Homelink

Universal Transceiver it this chapter.

Driver Controls

64

Advertising