Driver controls – FORD 2003 Crown Victoria v.3 User Manual

Page 88

Advertising
background image

The message center will remain in
the DTE function until the SELECT
control is pressed to change
functions.

Displayed DTE will not be equal to
AVG ECON multiplied by the FUEL
REMAIN value. DTE is calculated
using a method that considers the
fuel economy of the last 800 km
(500 miles) driven.

If “CO” or “CS” is displayed, there is a problem with the fuel indication
system and you should contact your dealer for service as soon as
possible.

AVG FUEL ECONOMY (average fuel economy)

Select this function to display your
average fuel economy in liters/100
km or miles/gallon.

If you calculate your average fuel
economy by dividing miles traveled by gallons used, your figure may be
different than displayed for the following reasons:
• your vehicle was not perfectly level during fill-up
• differences in the automatic shut-off points on the fuel pumps at

service stations

• variations in top-off procedure from one fill-up to another
• rounding of the displayed values to the nearest 0.1 liter (gallons)
Press the RESET control while AVG
ECON is displayed to reset the
function.

The average displayed is the average
since the last reset.

RESET

E/M

SELECT

TRIP

A

TRIP

B

AVG

SPEED

DISTANCE

TO EMPTY

AVG FUEL

ECONOMY

RESET

E/M

SELECT

Driver Controls

88

Advertising