Maintenance and specifications – FORD 2003 Escape v.1 User Manual
Page 220
Fluid
Ford Part
Name
Application
Capacity
Rear axle
lubricant
Motorcraft SAE
80W-90
Premium Rear
Axle Lubricant
4X4
1.4L
(2.96 pints)
5
Windshield
washer fluid
Motorcraft
Premium
Windshield
Washer
Concentrate
All
2.6L
(2.7 quarts)
1
Ensure the correct automatic transmission fluid is used. Transmission
fluid requirements are indicated on the dipstick or on the dipstick
handle. MERCON
and MERCON V are not interchangeable. DO NOT
mix MERCON
and MERCON V. Refer to your scheduled maintenance
guide to determine the correct service interval.
2
Service refill capacity is determined by filling the transmission to the
bottom of the filler hole with the vehicle on a level surface.
3
Indicates only approximate dry-fill capacity. Some applications may vary
based on cooler size and if equipped with an in-tank cooler. The amount
of transmission fluid and fluid level should be set by the indication on
the dipstick’s normal operating range.
4
Add the coolant type originally equipped in your vehicle.
5
Fill to 6 mm to 14 mm (1/4 inch to 9/16 inch) below bottom of fill hole.
Maintenance and Specifications
220