FORD 2003 Escape v.2 - Manual (Page 221)

Fluid Ford Part
Name Application Capacity
Engine coolant 4 Motorcraft
Premium Engine
Coolant (green
colored) or
Motorcraft
Premium Gold
Engine Coolant
(yellow-colored) 2.0L I4 Zetec
engine with
manual
transaxle 5.0L (5.3
quarts)
2.0L I4 Zetec
engine with
automatic
transaxle 6.0L (6.3
quarts)
3.0L V6 Duratec
engine with
automatic
transaxle 10.0L (10.6
quarts)
Rear axle
lubricant Motorcraft SAE
80W-90
Premium Rear
Axle Lubricant 4X4 1.4L (2.96 pints)
5
Windshield
washer fluid Motorcraft
Premium
Windshield
Washer
Concentrate All 2.6L (2.7
quarts)
1 Ensure the correct automatic transmission fluid is used. Transmission
fluid requirements are indicated on the dipstick or on the dipstick
handle. MERCON
௡ and MERCON௡ V are not interchangeable. DO NOT
mix MERCON
௡ and MERCON௡ V. Refer to your scheduled maintenance
guide to determine the correct service interval.
2 Service refill capacity is determined by filling the transmission to the
bottom of the filler hole with the vehicle on a level surface.
3 Indicates only approximate dry-fill capacity. Some applications may vary
based on cooler size and if equipped with an in-tank cooler. The amount
of transmission fluid and fluid level should be set by the indication on
the dipstick’s normal operating range.
4 Add the coolant type originally equipped in your vehicle.
5 Fill to 6 mm to 14 mm (1/4 inch to 9/16 inch) below bottom of fill hole.
Maintenance and Specifications
221