Driver controls – FORD 2003 Escape v.2 User Manual

Page 46

Advertising
background image

Installing a garage door opener (if equipped)

The storage compartment can be converted to accommodate a variety of
aftermarket garage door openers:
• Remove the Velcro pad from the

storage compartment door.

• Place Velcro on aftermarket

transmitter opposite of actuator
control.

• Install the transmitter on to

storage compartment door
aligning the actuator control with
the rubber plunger.

• Close the door and press the

storage compartment door to activate the transmitter.

Illuminated visor mirror (if equipped)

Lift the mirror cover to turn on the
visor mirror lamps.

SETTING AUTOLAMP (IF EQUIPPED)

1. Make sure the headlamp control
is in the OFF position. Leaving the
headlamp control in the ON position
will override the autolamp.

2. Turn the ignition to the ON
position or start the vehicle.

3. An illuminated green LED to the
left of the autolamp button indicates
the autolamp is ON. If the green
LED is not illuminated, then the
autolamp is OFF. Press the
autolamp button to activate the
autolamp.

Driver Controls

46

Advertising