Roadside emergencies – FORD 2003 Excursion v.3 User Manual

Page 165

Advertising
background image

This switch is located in the front
passenger’s footwell, by the kick
panel access cover.

To reset the switch:

1. Turn the ignition OFF.

2. Check the fuel system for leaks.

3. If no leaks are apparent, reset the
switch by pushing in on the reset
button.

4. Turn the ignition ON.

5. Wait a few seconds and return
the key to OFF.

6. Make another check of leaks.

FUSES AND RELAYS

Fuses

If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.

Note: Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.

15

2003 U137 Excursion (hdw)
Owners Guide (post-2002-fmt)
USA English
(fus)

Roadside Emergencies

165

Advertising