FORD 2003 Excursion v.3 - Manual (Page 53)

Install the new bulb(s) in reverse order.
Replacing front parking/turn signal bulbs
1. Make sure headlamp switch is in the OFF position, then open the
hood.
2. Remove the two screws and
carefully pull the parking lamp/turn
signal assembly from the vehicle.
3. Rotate bulb socket
counterclockwise and remove it
from lamp assembly.
4. Pull the bulb straight out of the
socket.
Install the new bulbs in reverse order.
2003 U137 Excursion (hdw)
Owners Guide (post-2002-fmt)
USA English (fus)
Lights
53