FORD 2003 Mustang v.5 - Manual (Page 43)

SPEED CONTROL (IF EQUIPPED)
With speed control set, you can maintain a speed of
48 km/h (30 mph) or more without keeping your
foot on the accelerator pedal. Speed control does
not work at speeds below 48 km/h (30 mph).
Do not use the speed control in heavy traffic
or on roads that are winding, slippery or
unpaved.
Setting speed control
The controls for using
your speed control are
located on the steering
wheel for your
convenience.
1. Press the ON control
and release it.
2. Accelerate to the desired speed.
3. Press the SET
ACCEL control and
release it.
4. Take your foot off
the accelerator pedal.
Note:
• Vehicle speed may vary momentarily when driving
up and down a steep hill.
• If the vehicle speed increases above the set speed
on a downhill, you may want to apply the brakes
to reduce the speed.
• If the vehicle speed decreases more than 16 km/h
(10 mph) below your set speed on an uphill, your
speed control will disengage.
OFF
ON
RESUME
SET
ACCEL
COAST
2003 Mustang (mus)
Owners Guide (post-2002-fmt)
USA English (fus)
Driver Controls
43