Seating and safety restraints – FORD 2003 Windstar v.1 User Manual

Page 105

Advertising
background image

Front safety belt height adjustment

Your vehicle has safety belt height
adjustments at the front and second
row outboard seating positions.
Adjust the height of the shoulder
belt so the belt rests across the
middle of your shoulder.

To adjust the shoulder belt height,
push the button and slide the height
adjuster up or down. Release the
button and pull down on the height
adjuster to make sure it is locked in
place.

Position the safety belt height adjusters so that the belt rests
across the middle of your shoulder. Failure to adjust the safety

belt properly could reduce the effectiveness of the seat belt and
increase the risk of injury in a collision.

Lap belts

Adjusting the 3rd row center lap belt

The lap belt does not adjust automatically.

The lap belt should fit snugly and as low as possible around the
hips, not across the waist.

Insert the tongue into the correct
buckle (the buckle closest to the
direction the tongue is coming
from). To lengthen the belt, turn the
tongue at a right angle to the belt
and pull across your lap until it
reaches the buckle. To tighten the
belt, pull the loose end of the belt
through the tongue until it fits snugly across the hips.

Seating and Safety Restraints

105

Advertising