FORD 2002 Crown Victoria v.1 - Manual (Page 229)

REFILL CAPACITIES
Fluid Ford Part Name Capacity
Engine oil (includes
filter change) Motorcraft SAE 5W-20
Super Premium Motor
Oil
4.7L (5.0 quarts)
Brake fluid Motorcraft High
Performance DOT 3
Motor Vehicle Brake
Fluid
1
Fill to line on reservoir
Power steering fluid Motorcraft MERCON
௡
ATF
Fill to line on reservoir
Transmission fluid 2 Motorcraft
MERCON
௡V ATF
13.2L (13.9 quarts) 3
Engine coolant 4 Motorcraft Premium
Engine Coolant
(green-colored) or
Motorcraft Premium
Gold Engine Coolant
(yellow-colored)
15.0L (15.8 quarts)
Fuel tank N/A 71.9L (19.0 gallons)
Rear axle lubricant 5 Motorcraft SAE
80W-90 Premium Rear
Axle Lubricant
1.8L (3.75 pints)
Windshield washer
fluid Ultra-Clear Windshield
Washer Concentrate
Fill to line on reservoir
1 Use only brake fluids certified to meet Ford specifications. Refer to
Lubricant Specifications in this chapter. DOT 3 fluid is recommended.
However, if DOT 3 is not available, DOT 4 fluid can be used.
2 Ensure the correct automatic transmission fluid is used. MERCON
௡ and
MERCON
௡ V are not interchangeable. DO NOT MIX MERCON௡ and
MERCON
௡ V. Refer to the scheduled maintenance guide to determine
the correct service interval.
3 Indicates only approximate dry-fill capacity. Some applications may vary
based on cooler size and if equipped with an in-tank cooler. The amount
of transmission fluid and fluid level should be set by the indication on
Maintenance and Specifications
229