Driver controls – FORD 2002 Crown Victoria v.1 User Manual

Page 85

Advertising
background image

Select

Each press of the SELECT control
will select a different function.
• Press the right side of the control

to advance the function to the
right.

• Press the left side of the control

to advance the function to the
left.

To reset any function:

1. Push either the right or left side of the SELECT control to choose the
desired function.

2. Press the RESET control and the
selected message center function
will be reset to zero.

Message center functions

DISTANCE TO EMPTY (DTE)

This function estimates
approximately how far you can drive
with the fuel remaining in your tank
under normal driving conditions.
Remember to turn the ignition OFF
when refueling your vehicle. Otherwise, the display will not show the
addition of fuel for a few miles. At least four gallons of fuel must be
added for the fuel gauge to immediately show the new fuel level.

The DTE function will flash for 5 seconds and sound a tone for 1 second
when you have approximately:
• 80 km (50 miles) left before you run out of fuel
• 40 km (25 miles)
• 16 km (10 miles)

RESET

E/M

SELECT

RESET

E/M

SELECT

DISTANCE

TO EMPTY

TRIP

A

AVG FUEL

ECONOMY

TRIP

B

AVG

SPEED

Driver Controls

85

Advertising