Seating and safety restraints – FORD 2002 Expedition User Manual

Page 116

Advertising
background image

To minimize the risk of personal injury, the third row seat should not be
left in the forward, stowed position while the vehicle is in motion. Please
ensure that the seat is in the upright, fully latched position before
putting the vehicle in motion.

1. Locate and lift seat control “3RD ROW ENTRY” to release seatback
and cushion to flip toward the front seat.

2. After entering the seat, reverse this procedure; ensure that the latch
tub and surrounding areas are clear.

Folding down the third row seat

Pull the seat release lever located
on the lower right side of the
seatback while pushing the seatback
down into the seat cushion. The
seatback will latch into place.

Pull the seat release lever to return
the seatback into the upright seating
position.

Removing the third row seat

From the rear of the vehicle, with
the liftgate open:

1. Disengage the lap/shoulder belt
from the floor by inserting a key or
small screwdriver through the hole
in the boot of the detachable
anchor. Then, press the release
button to separate the detachable
anchor from the anchor tongue.

Seating and safety restraints

116

Advertising