FORD 2002 Mustang v.2 - Manual (Page 204)

ENGINE COOLANT
Checking engine coolant
The concentration and level of engine coolant should
be checked at the mileage intervals in the scheduled
maintenance guide. The coolant concentration
should be maintained at 50/50 coolant and water,
which equates to a freeze point of -36° C (-34° F).
Coolant concentration testing is possible with a
hydrometer or antifreeze tester (such as the
Rotunda Battery and Antifreeze Tester, 014–R1060).
The level of coolant should be maintained at the
“cold full” of “cold fill range” level in the coolant
reservoir. If the level falls below, add coolant per the
instructions in the Adding Engine Coolant section.
Your vehicle was factory-filled with a 50/50 engine
coolant and water concentration. If the
concentration of coolant falls below 40% or above
60%, the engine parts could become damaged or not
work properly. A 50–50 mixture of coolant and
water provides the following:
• freeze protection down to -36° C (-34° F)
• boiling protection up to 129° C (265° F)
• protection against rust and other forms of
corrosion
• enables calibrated gages to function properly
• 3.8L OHV V6 engine
Maintenance and Specifications
204