Driver controls – FORD 2002 Windstar v.2 User Manual

Page 106

Advertising
background image

2. Press and release the RESET
control to display “OIL LIFE XX%
HOLD RESET NEW”.

3. Press and hold the RESET
control for 2 seconds to display “IF
NEW OIL HOLD RESET”.

4. Release the RESET control
momentarily, then press RESET and
SETUP controls at the same time to
activate a service mode which will
display OIL LIFE XX% RESET TO
ALTER.
5. Press RESET until you find your personalized OIL LIFE XX%.
6. With your personalized OIL LIFE XX% displayed, press SETUP to
continue the system check.
DATA ERR. These messages indicate improper operation of the vehicle
network communication between electronic modules.
• Fuel Computer

• Oil life

• Charging system

• Door sensor

• Liftgate sensor

• Exterior lamps

• Traction control

• Washer fluid

• Brake Fluid

• Compass

• Outside temperature
Contact your dealer as soon as possible if these messages occur on a
regular basis.

Compass display (if equipped)

The compass reading may be affected when you drive near large
buildings, bridges, power lines and powerful broadcast antenna. Magnetic
or metallic objects placed in, on or near the vehicle may also affect
compass accuracy.

Driver Controls

106

Advertising