Maintenance and care – FORD 2001 Expedition User Manual
Page 241
Replacing license plate lamp bulbs
The license plate bulbs are located
behind the rear bumper. To change
the license plate lamp bulbs:
1. Reach behind the rear bumper to
locate the bulb.
2. Twist the bulb socket
counterclockwise and carefully pull
to remove it from the lamp
assembly.
3. Pull out the old bulb from the
socket and push in the new bulb.
4. Install the bulb socket in lamp assembly by turning it clockwise.
Using the right bulbs
Replacement bulbs are specified in the chart below. Headlamp bulbs must
be marked with an authorized “D.O.T.” for North America and an “E” for
Europe to assure lamp performance, light brightness and pattern and safe
visibility. The correct bulbs will not damage the lamp assembly or void the
lamp assembly warranty and will provide quality bulb burn time.
Function
Number of bulbs
Trade number
Headlamps
2
9007
Front park/turn lamps
2
3157 AK (amber)
Foglamps
2
899
Dome/map lamps
2
579
Turn/tail/brake lamps
2
3157K
Liftgate lamp
2
916
Backup lamp
2
3156K
License lamp
2
168
High-mount brake
lamp
3
912
Running board lamp
(if equipped)
2
168
All replacement bulbs are clear in color except where noted.
To replace all instrument panel lights - see your dealer
Maintenance and care
241