Controls and features – FORD 2001 Expedition User Manual

Page 62

Advertising
background image

Fan speed (

)

When AUTOMATIC is pressed, fan
speed is adjusted automatically for
existing conditions. You can override
fan speed at any time. To control
fan speed manually, use the
thumbwheel or steering wheel
control to cancel automatic fan
speed operation.

• Rotate the thumbwheel up for higher fan speed or down for lower fan

speed.

• Press the steering wheel control up for higher fan speed or down for

lower fan speed.

The display will show

to

indicate manual fan operation.

To return to automatic fan operation, press AUTOMATIC.

Manual override controls

The override controls are located at
the bottom of the EATC and allow
you to determine where airflow is
directed. To return to full automatic
control, press AUTOMATIC.

The air conditioning compressor can operate in all modes except FLOOR
and VENT. It will also operate only when required when AUTOMATIC
has been selected. However, the air conditioning will only function if the
outside temperature is about 6°C (43°F) or higher.

Since the air conditioner removes considerable moisture from the air
during operation, it is normal if clear water drips on the ground under
the air conditioner drain while the system is working and even after you
have stopped the vehicle.
• MAX A/C-Uses recirculated air to cool the vehicle. The temperature

will display 16°C (60°F). To exit, press AUTOMATIC or any other
override controls. MAX A/C is noisier than normal A/C but more

FLR • DEF

DEF

HI

LO

AUTOMATIC

OFF

˚

F

AUTO

VENT

PNL • FLR

FLOOR

FLR • DEF

DEF

HI

LO

MAX A/C

OUTSIDE TEMP

AUTOMATIC

OFF

F

AUTO

Controls and features

62

Advertising