FORD 2000 Contour - Manual (Page 158)

Roadside emergencies
158
Jump starting
1. Start the engine of the booster
vehicle and run the engine at a
moderately increased speed.
2. Start the engine of the disabled
vehicle.
3. Once the disabled vehicle has
been started, run both engines for
a further three minutes before
disconnecting the jumper cables.
Removing jumper cables
Remove the jumper cables in
the reverse order that they
were connected.
1. Remove the jumper cable from
the “ground” metal surface.
5. Be sure that the cables are clear
of fan blades, belts and other
moving parts of both engines.
23CREen 17.6.99 11:11 Uhr Seite 158