Starting – FORD 1999 E-450 User Manual

Page 100

Advertising
background image

Make sure the corresponding lights illuminate briefly. If a light fails to
illuminate, have the vehicle serviced.
• If the driver’s safety belt is fastened, the

light will not illuminate.

STARTING THE ENGINE

1. Turn the key to 5 (START)
without pressing the accelerator
pedal and release as soon as the
engine starts. The key will return to
4 (ON).

2. If the temperature is above –12°C (10°F) and the engine does not
start within five seconds on the first try, turn the key to OFF, wait ten
seconds and try again.

3. If the temperature is below –12°C (10°F) and the engine does not
start in fifteen seconds on the first try, turn the key OFF and wait ten
seconds and try again. If the engine does not start in two attempts,
depress the accelerator and start the engine while holding the
accelerator down to the floor. Release the accelerator when the engine
starts.

4. After idling for a few seconds, apply the brake and release the parking
brake.

0

10

20

30

40

50 60

70

80

90

100

20

km/h

40

60

80

100

120

140

H

L

160

MPH

0 0 0 0 0 0

0 0 0 0

BRAKE

18

8

SERVICE

ENGINE SOON

F

H

C

E

3

2

1

5

4

Starting

100

Advertising
This manual is related to the following products: