FORD 1999 E-450 - Manual (Page 191)

Fluid Ford Part
Name Application Capacity
Transmission 6 Motorcraft
MERCON
௡V
ATF
Automatic
(4R70W) 13.1L
(13.9 quarts)
Motorcraft
MERCON
௡ ATF
Automatic
(4R100)
7
15.0L
(15.9 quarts)
8
Windshield
washer fluid Ultra-Clear
Windshield
Washer
Concentrate All Fill to line on
reservoir
If your vehicle’s rear axle is filled with a synthetic rear axle lubricant it is
considered lubricated for life. These lubricants do not need to be
checked or changed unless a leak is suspected, service is required or the
axle assembly has been submerged in water. The axle lubricant should
be changed any time the rear axle has been submerged in water.
1 If your engine coolant is green in color, use Ford Premium Cooling
System Fluid. If your coolant is orange in color, use Ford Extended Life
Engine Coolant. Refer to Adding engine coolant, in the Maintenance
and Care chapter.
2 Fill 6 mm to 14 mm (1/4 inch to 9/16 inch) below bottom of fill hole.
Add 118 ml (4 oz.) of additive friction modifier C8AZ-19B546-A, Ford
specification EST-M2C118–A, for complete refill of 8.8 inch and 9.75 inch
Traction-Lok axles.
3 Fill Dana rear axles to 6 mm to 19 mm (1/4 inch to 3/4 inch) below
bottom of fill hole.
4 Ford conventional and Traction-Lok axles, Dana 80 axle (E-Super
Duty) and Dana axles on E-350 vans/wagons with 4.10:1 ratio require
Motorcraft SAE 75W140 Synthetic Rear Axle Lubricant (part number
F1TZ-19580–B). Add 118 ml (4 oz.) of friction modifier C8AZ-19B546-A,
Ford specification EST-M2C118–A. Dana conventional and limited-slip
axles require Motorcraft SAE 80W90 Premium Rear Axle Lubricant. Add
177ml (6 oz.) of additive friction modifier C8AZ-19B546-A, Ford
specification EST-M2C118–A.
5 Optional fuel tank 208.0L (55 gallon).
6 Always use dipstick to determine exact fluid requirement.
Capacities and specifications
191