Controls and features – FORD 1999 Windstar User Manual

Page 99

Advertising
background image

Reprogramming transmitters

To reprogram the transmitters yourself, place the key in the ignition and
turn from OFF to ON eight times in rapid succession (within 10 seconds)
ending in the ON position. After doors lock/unlock, press any control on
all transmitters (up to four). With each control press of the transmitters,
the door should cycle (lock/unlock) to confirm programming. When
completed, turn the ignition to OFF. The door locks should cycle
(lock/unlock) one last time to confirm completion of programming.

Autolock (if equipped)

This feature automatically locks all doors when:
• all vehicle doors are closed
• the ignition is in the RUN/START position
• you shift into or through R (Reverse)

Relock

The autolock feature repeats when:
• the ignition is in the RUN/START position
• the vehicle speed is below 5 km/h (3 mph) and any door is opened

then closed

• the vehicle speed exceeds 5 km/h (3 mph)

Deactivating/activating the autolock feature

The autolock/relock feature can be turned off by your dealer.

Deactivating/activating the illuminated exit feature

The illuminated exit feature can be turned off by your dealer.

PERIMETER ALARM SYSTEM (IF EQUIPPED)

The perimeter anti-theft system will help prevent your vehicle from
unauthorized entry.

Controls and features

99

Advertising