Controls and features – FORD 1998 Expedition User Manual

Page 24

Advertising
background image

Mode selector control

Controls the direction of the
airflow to the inside of the vehicle.

The air conditioning compressor
will operate in all modes except
PANEL and FLOOR. However, the
air conditioning will only function
if the outside temperature is about
10°C (50°F) or above.

Since the air conditioner removes
considerable moisture from the air
during operation, it is normal if
clear water drips on the ground
under the air conditioner drain
while the system is working and
even after you have stopped the
vehicle.

Under normal conditions, your
vehicle’s climate control system
should be left in any position other
than MAX A/C or OFF when the
vehicle is parked. This allows the
vehicle to “breathe” through the
outside air inlet duct.
• MAX A/C-Uses recirculated air

to cool the vehicle. MAX A/C is
noisier than A/C but more
economical and will cool the
inside of the vehicle faster.
Airflow will be from the
instrument panel registers. This
mode can also be used to
prevent undesirable odors from
entering the vehicle.

• A/C-Uses outside air to cool the

OFF

PANEL

A/C

FLOOR

DEF

FLR

& DEF

MAX

A/C

PANEL &

FLOOR

Controls and features

24

Advertising