Seating and safety restraints – FORD 1998 Expedition User Manual

Page 68

Advertising
background image

• Pull the seat release lever

located on the lower right side
of the seatback while pushing
the seatback down into the seat
cushion.

• The seatback will latch onto the

cushion.

4. Lift the seat release bar located
at the center of the seat near the
floor to release the floor latches.

5. While pulling up on the release
bar, lift the seat up and out of the
floor tubs.

6. With assistance, lift the seat out
of the vehicle.

Installing the third row seat

Always latch the vehicle
seat to the floor, whether

the seat is occupied or empty. If
not latched, the seat may cause
injury during a sudden stop.

When reinstalling a rear
seat in your vehicle it must

be placed in its original position.
Improper installation of the seat
will prevent correct use of the
safety belts and could increase
the risk of injury. Refer to the
warning label on the seat belt.

Seating and safety restraints

68

Advertising