Cambridge Audio INCOGNITO LK10 - Manual (Page 7)

ENGLISH
LK10
7
Power requirement
The LK10 runs on 24 V DC (@ 250mA max) supplied through the connecting cable from the KP10
keypad. As such there is no mains voltage present in the KP10 and the unit is often safe to fit in
areas where only extra low voltage (ELV) equipment is permitted. However, it is imperative that you
always check the wiring regulations in force for your application and area.
Faceplates
The LK10 faceplate system is based on the ‘Easy Clip’ module standard and is interchangeable with
the wide range of faceplates made by manufacturers such as MK Electric, RPP etc that conform to
this standard. If it is desired to fit another faceplate, it can be replaced by gently prising apart the
LK10 faceplate and snapping on another in its place.
Approvals
This product complies with European Low Voltage (2006/95/EC) and Electromagnetic
Compatibility (89/336/EEC) Directives when used and installed according to this
instruction manual. For continued compliance only Cambridge Audio accessories should
be used with this product and servicing must be referred to qualified service personnel.
The crossed-out wheeled bin is the European Union symbol for indicating separate collection
for electrical and electronic equipment. This product contains electrical and electronic
equipment which should be reused, recycled or recovered and should not be disposed of
with unsorted regular waste. Please return the unit or contact the authorised dealer from
whom you purchased this product for more information.