Setting the standby delay – ITC Avoximeter 4000 Whole Blood CO-Oximeter User Manual
Page 26
ITC AVOXimeter 4000 Operator’s Manual
4.
Use the number keys to enter the new date, then press
. The new date is
displayed.
followed by
.
5.
Press
The “Time, Date, and Battery” menu is again
displayed.
6.
Press
to return to the previous menu, if desired.
Setting the Standby Delay
The instru
mode after being inactive for a specified length of
time (the Standby Del
preset for a standby delay time of 60 minutes,
bu
ment enters a low-power Standby
ay). The instrument is factory
t a time of 10 to 180 minutes can be specified.
1.
Display the “Device Settings” menu (a submenu of
, see page 7).
2.
Press
followed by
to display the standby delay (60 minutes is the
factory default value):
3.
Press
followed by
to display the screen for changing the standby delay:
4.
U
y delay (or disable the standby
delay), then press
se the number keys to enter the new standb
. The new standby delay is displayed.
followed by
.
5.
Press
The “Device Settings” menu is again displayed.
6.
Press
to return to the previous menu, if desired.
18