Jeppesen JeppView 3 - Manual (Page 5)

6 7
Installing Electronic Chart Data Disc 1 (DVD) (Continued)
4. Verify that the terminal chart coverage areas listed for your serial
number are the ones you purchased.
• Enter any additional coverage codes that you have (if applicable,
select IhaveadditionalCoverageCodes and click Next).
• Click Apply to add to the list the coverage areas associated with
those codes and click Next.
Coverage codes appear below the serial number on the back of your
DVD album. Contact Jeppesen to subscribe to additional coverage areas.
5. NavSuite MFD Users Only: The JSUM program launches where you can
login and begin the programming process to your datacard to update
your MFD system. For JSUM information, see page 12.
6. After the update is complete, click Finish and continue with the
installation of Disc 2.
Installing Electronic Chart Data Disc 2 (CD)
To receive NavSuite program updates, Jeppesen aeronautical data and text
data, follow these steps:
1. Insert Disc 2 into the CD-ROM drive.
2. If you are installing JetPlanner, choose a NavData coverage area.
3. Review the installation summary and click Next to begin the
installation. The installation may take a few minutes to complete.
4. Follow the remaining screens to finish the installation.
Check the cycle/issue date of the data on your disks to determine if you
need to update your data immediately through the Internet.
Activating your Software
When you open any of the NavSuite programs, the Activation Wizard
launches and guides you through the activation process. Read the information
on the first screen and either click
Next to activate the program or click Start
Program(30days) to postpone the activation process and open the program.
You have 30 days to activate the NavSuite programs. After 30 days, only the
Activation Wizard opens, and the programs are disabled until the activation
is complete.
Updating the Programs
Electronically update your programs, enroute data, terminal charts, and
electronic text every 14 days using the UpdateClient. You must be connected
to the Internet and must have a valid NavSuite serial number. If you are
using a proxy server, please follow the instructions in any of the application
Help files to properly configure the software to communicate to the update
server. There is a large amount of data to download and the time it takes
depends on your subscription coverage and connection speed. Follow these
steps to update the date through the Internet:
1. Connect to the Internet.
2. Open UpdateClient by double-clicking UpdateClient.exe in one of the
NavSuite program folders, or by clicking File>CheckforUpdates in
JeppView, FliteStar, or JetPlanner.
3. If a dialog box appears with a list of Jeppesen products, select NavSuite
and click OK.