Jeppesen Mobile FliteDeck for iPad - Manual (Page 16)

Introduction
Global Settings
October 2014 Jeppesen Mobile FliteDeck User Guide
Copyright © 2014 Jeppesen. All rights reserved.
9
Weather
These settings control your view of weather information.
Weather data is provided by Jeppesen weather services and is
obtained from either the National Weather Service or the UK
Meteorological Office.
• To view weather data overlaid on the enroute map, switch
Display Enroute Wx to ON. This setting is OFF by
default.
• To view terminal weather from the Terminal Charts view,
or from an Airport popover accessed from the enroute map,
ensure that Display METAR/TAF weather is set to ON.
This setting is ON by default.
• Temperature Unit options are Fahrenheit (default) or
Celsius.
• Default METAR/TAF Format options are Raw (default)
and Decoded.